Hello World! Welcome Friends! Just like most of the things you have at home, water filters have a finite number of weeks or months within which they can work at an optimum level. As such, you can expect them to break down after some time. It’s important that you keep an eye on these items regularly because you never know when things will go south. The significance of such an occurrence can never be underestimated as everyone in your household uses water for various purposes.
Occasional maintenance will help improve the operation of your filters, but there comes a time when the old ones can’t be repaired anymore. Usually, you should replace the water filters after about 12 or so months, depending on the quality. However, sometimes the signs come out too early, and you have to install new ones even before the 12-month period lapses.
Of course, quality products, like Filtap water filters, will always operate for a required amount of time, but it’s still important to observe any noticeable changes. So, what are the symptoms that you should look out for? This article aims to answer that particular question, and help protect you from potential health risks.
Indicator Light
As technology advances, things are made a lot easier for users. Most water filter manufacturers have already figured out a way to keep end users safe from dirty water. Nowadays, you’ll find most water filters with a signal light that turns on when a given amount of water has been filtered through. Inasmuch as this technique may help, it isn’t accurate because the indicator light could send a signal when the damage has already occurred, or way before the filter begins to malfunction.
As such, a new method has been introduced, wherein the filter senses the amount of dirt trapped. Of course, the more the dirt, the higher the chances of you being supplied with contaminated water. So, to avoid such cases, the filter light turns on as soon as it senses that the dirt has surpassed a certain level.
Restricted Flow Of Water
As you’d expect, not all water filters come fitted with an indicator light. As such, you’ll need another sign that will help you in the process. Observation is one of the easiest ways to know if your water filter needs replacement. For instance, if the pressure of water or the rate of flow through your taps has been reducing within the past few days, then that might be a sign of clogging. As the water filter traps the contaminants from your water, these impurities pile up and make it difficult for water to pass through.
Therefore, make sure you check out your filter as soon as you experience such change in water flow. However, keep in mind that the problem could also be your pump or the water supply company. So, don’t rush into conclusions and end up messing with your budget unnecessarily.
Strange Taste Or Odor
Another very easy sign of knowing that your filtration system needs a replacement has to do with the taste of the water. Normally, clean water shouldn’t have any noticeable taste or odor even after being purified using chlorine chemicals. However, as the water flows through the filters, these parts become filled with trapped dirt, which then make it hard for the system to continue absorbing more contaminants.
As such, it reaches a time when the filters give in to the pressure and start releasing traces of impurities to your home’s water supply line. These contaminants are what give your water that strange taste. Try changing the filters and observe if the strong taste persists. Inasmuch as it’s the easiest, using this technique means that you’ll have to take a few impurities before you notice that re-installation is needed.
Keep Track Of Time
All the tips given so far are highly dependent on the impurities trapped by the filters. In other words, if these signs don’t appear, then you might find yourself using the system longer than you should. Every manufacturer has a set timeline, after which the filter won’t work at its optimum level.
For instance, if the recommended period is six months, but the signs start appearing after one year, then you’ll be risking your family’s health. Therefore, it’s imperative that you read the manufacturer’s manual carefully and mark the item’s lifespan. Replace it as soon as its time lapses, even if there are no changes in the taste, odor, or flow rate.
Conclusion
Water filters come in different qualities, and they also have different features. For instance, there are those that have an indicator light designed to signal the user whenever a new filter is needed. If yours doesn’t have this feature, then you should observe the taste, odor, and flow rate of the water. All these can come in handy, but the manufacturer’s recommended lifespan should always take precedence.
Click the links below for any posts you have missed:
Pool Construction Tips for Tiny Backyard
A Pantry Refresh & Organization
I’d love for you to join my email list! You’ll receive a notification straight to your inbox once a week which will include links to my latest home project posts! Simply enter your address below.
Thanks for stopping by! Have a wonderful day/night depending on where you are in the world! Go with God and remember to be kind to one another!
Toodles,
[…] Time To Change Your Water Filter […]