Hello World! Welcome Friends! There is no mistaking when you discover mold. Those black spots are positive confirmation that you have mold present and it is an issue that needs addressing urgently so that you can prevent the problem from getting out of hand and becoming a health hazard.
Following some useful mold removal tips can help you deal with the issue, to a certain extent, although it might require the services of a professional removal firm to tackle the problem and eradicate the threat completely.
Even if you currently have a small amount of mold present you should be mindful that it has the ability to damage your health and could spoil household valuables if left unchecked and untreated.
Here is a look at how to evaluate the extent of your mold problem so that you can decide whether you might be able to remove it yourself. There are also some useful tips and suggestions to help you get rid of mold in your home.
Is It a Job You Can Do Yourself?
The simple answer is yes you can remove mold yourself. However, it does entirely depend on the scale of the problem and where the mold is in your home. If the case is too severe then you are better off calling in the professionals. To find the right service for you it is worth researching Mold Busters Montreal vs. Espace Renovert: pros and cons to help you make an informed decision.
You need to be very mindful that mold spores are airborne when you disturb them through the cleaning process. If you don’t wear the right protective gear you could be exposed to these spores. This could potentially be damaging to your health.
The first rule of engagement if you are planning on tackling mold removal yourself is to commit to investing in the right protective wear and equipment. At the very least, you should consider wearing some long rubber gloves so that your hands and forearms do not come into direct contact with the mold.
It is also essential that you wear eye protection. It is very easy to accidentally get bleach or other cleaning agents in your eyes when you are trying to remove mold from an overhead position such as your ceiling.
There is a rule of thumb that you might want to follow when deciding to tackle the problem of mold removal yourself.
Generally speaking, if you can see more than a few spots of mold and the area affected is more widespread over more than a couple of square feet it would be wise to consider calling in a professional to deal with the problem.You can easily find mold remediation services at alabamamold.com that can help you eliminate the problem safely and effectively.
One of the reasons for this is that widespread mold is a potential sign that you have a moisture problem that needs to be professionally investigated.
What Are Some of the Best Products for Removing Mold?
If you are thinking of trying to clean the mold yourself to see if you can improve the situation there are a couple of products that are usually effective in removing mold.
A branded mold and mildew remover is quick and easy to use. It comes in a spray bottle so it is easy to apply to the affected area with a degree of accuracy. Follow the instructions on the bottle and make sure you are wearing the protective gloves and goggles when using the product.
Chlorine bleach is another suitable product that can help you with mold removal. Again, this is a product that needs to be used with care and you should read the instructions carefully before use.
A bath and kitchen cleaner could also have some impact on removing the mold. You could also search for a mold control spray to help with removal.
If you are using these sorts of products it is highly advisable that you read the usage instructions carefully. It would also be worth looking for an online tutorial for some guidance on how to use these products to remove mold in the most safe and effective way possible.
What About Natural Remedies?
If you are concerned about using chemical products for health and environmental reasons there are a number of more natural solutions to consider.
When considering using these natural options it is worth bearing in mind that it may require more applications and time spent removing the mold than if you use a more powerful chemical based product.
Undiluted vinegar is a natural remedy to consider. You can pour it into a spray bottle and apply to the area where mold is present. Once you have applied the vinegar solution you should wait for about an hour for it to penetrate the mold. Then wipe the area clean with a small amount of water and let it dry naturally.
Another option would be to use hydrogen peroxide. Pour a small amount of the solution into a spray bottle and let it work into the affected area for about ten minutes after spraying. You should be able to scrub most of the mold away once you have waited for the solution to work.
Tackling Common Bathroom Mold Problems
One of the most common areas in your home where you might get a small amount of mold that you could remove is in the bathroom.
It is always going to be a challenge to keep mold away from the grout and tiles in your shower area. The wet and warm climate that you create by running hot water on a regular basis makes for perfect breeding conditions for mold. These small amounts of mold that can appear are usually fairly straightforward to remove yourself.
Use of the suggested natural solutions or a branded mold remover to clear the mold from the affected area.
When trying to remove mold from grout you should allow a little bit of time after spraying to let the solution penetrate. You can actually get a branded mold and mildew remover that has been specifically designed to kill all mold, mildew, and bacteria in a matter of minutes, without having to scrub the grout.
Removing mold from walls and ceilings is a bit more of a challenge.
One of the issues you will have when mold appears on a ceiling tile is that it can be very difficult to remove effectively because this type of tile is very porous. If the mold has only just appeared you might be able to remove it effectively. If the mold has been allowed to penetrate the surface it might actually be better to replace the tile rather than try and clean it.
Try using a water and bleach solution to gently remove mold from walls in your bathroom. Gently apply the solution wearing rubber gloves and using a sponge to gently scrub the impacted area.
Another regular problem in a bathroom is to find that your shower curtain or liner has developed mold spots.
If your curtain or liner is made from plastic it should be safe to use a mold and mildew spray to remove the mold. You could even put the curtain through your washing machine using a delicate cycle.
If you have mold on a fabric surface you should firstly try to gently brush off mold outside so that you don’t risk spores penetrating the air in your home. Again, you could also wash the fabric item using a delicate cycle on your washing machine.
Mold In the Kitchen
You will often find wooden surfaces in the kitchen and the high levels of humidity in this busy part of your home mean that you could get mold on things like a wooden cabinet or work surface.
You can also find that mold could find the conditions to grow on other wooden items if the kitchen has high humidity and air circulation is not sufficient.
The first step to try is to use a vacuum with a HEPA filter so that you can gently vacuum the loose spores and remove them as safely as possible. A weak solution of detergent and water can be used to wipe the surface after you have vacuumed. Make sure you don’t allow the wood to get too wet and don’t leave it wet for too long after cleaning as this could damage the wood.
Deciding What to Do
If you have a few spots of mold in common areas such as your bathroom you should be able to remove the mold yourself using a solution.
However, if the extent of the problem is bigger than a few spots and the mold is persistently returning, even after you have cleaned the area, that would be a good opportunity to seek a professional opinion to see what is going on and why mold is thriving in certain parts of your home.
Working around mold does require a cautious approach to ensure that your health and safety is not compromised. Small mold removal jobs should be within your scope as long as you are proactive in removing mold as soon as you see it.
Anything more substantial or persistent should be investigated by a mold removal specialist.
Prevention is the best remedy for tackling mold. If you have problems with damp conditions and high humidity, consider getting a humidifier to try and get the problem under control.
Getting rid of mold in your home should be a top priority. Whether you tackle the job yourself or call a professional it is always a good idea to act as fast as possible.
Click the links below for any posts you have missed:
4 Savvy Ways to Add Livable Space to Your Home
Main Benefits of Installing a Small Garden Shed In Your Backyard
Tips for Maintaining Your Home’s Toilets
Everything You Must Know About Ceiling Covings and Their Enormous Benefits
Cost Isn’t Everything When Purchasing Service Plan for Your Car
Here’s Why Proper Garage Maintenance Is Worth the Effort
I’d love for you to join my email list! You’ll receive a notification straight to your inbox which will include links to my latest home project posts! Simply enter your address below.
Thanks for stopping by! Have a wonderful day/night depending on where you are in the world! Go with God and remember to be kind to one another!
Toodles,
[…] How to Get Rid of Mold in your Home […]