Hello World! Welcome Friends! How much do you care for your AC unit? Air-conditioning repair and maintenance can be pricey for most homeowners, which is why they hire such services when absolutely necessary.
Nevertheless, some problems can be taken care of by homeowners themselves, especially those solved with cleaning and regular maintenance. Germantown residents can perform some easy and quick checks prior to hiring professional assistance.
The following air-conditioning fixing guide provides useful tips for homeowners in Germantown.
Cleaning Filters
One of the most effective ways to maintain your AC system in optimal condition is by cleaning the filters, especially for ducted models. The path of ducted air commences at the indoor fan coil unit, circulates around the building, and it’s then blown out via the outlets in each room. Afterward, the air gets sucked back into the system by passing through the return air grille and going back to the indoor unit. Find out more about finding the location of your air filter.
In ducted models, the filter is usually located on top of the return air grille. The role of these devices is to impede airborne particles, grime, dust, and other contaminants from circulating in your home. Anyhow, such particles can only be captured by a clean filter. Otherwise, they would reach the fan coil unit and induce dirt accumulation and mold growth. A clogged filter reduces airflow and makes the other components wear out much faster than normal.
The easiest way to check if a filter requires cleaning is by holding it up to the light to see if any light can be seen through it. If you cannot see any light at all, it’s definitely time to clean or replace it. Washable filters can be cleaned, whereas disposable ones should be replaced. Once you locate the filter, you should gently slide it out. Start by vacuuming any dust, lint, or grime on the surface, then wash it in warm water with mild detergent.
The following step is to give your filter a rinse by using a hose or a shower. Then, it should be left to dry completely, if possible by exposing it to direct sunlight. Prior to putting it back, check the material for tears and thin areas. In case it comes out of the frame, it’s time to purchase a new one. If the condition of your filter is good, remember to apply a layer of antibacterial spray to its surface to slow down the growth of bacteria and mold.
Once you complete all these steps, the filter should be placed back into the right position. Don’t forget to look for arrows or markers showing the correct direction of putting it back. You should then turn the AC on to test the system. If you happen to hear even the slightest whistling, make sure to adjust the filter a bit to resolve the problem.
Condensate Drain Inspection
A blocked AC condensate drain is a frequent indicator that an air-conditioning unit needs servicing. There are numerous licensed air-conditioning contractors, like Integrity Heating & Cooling experts, offering professional servicing and repairs. Some homeowners prefer hiring professionals for any job related to their ACs, while others test their DIY skills.
Condensate drains are connected to a drain tray or pan at the unit indoors and then run into a collection point outdoors. This drain enables the condensation produced during the refrigeration cycle to be carried outside. Anyhow, blockages can occur when debris, algae, mold, or slime accumulate in the drain line. Also, insects like cockroaches often die while passing through the line and end up causing blockage due to absorbing water over time.
Such a blockage results in a flow of water in inappropriate places, such as in front of the indoor unit, through the air vents, from the ceiling, etc. Homeowners can easily check for drain blockage by looking at the condensate tray, which should be draining the water away, not collecting it. If you can access the end of the drain, you should use a wet/dry vacuum to suck everything out of it.
To Sum Up
You can test your DIY skills but make sure not to handle too complicated problems!
Click the links below for any posts you have missed:
What to Know When You Are Trying to Conceive
Tips To Upgrade Your Home Security
Finding the Right Generator For the Job
4 Things You Need to Know About Your Tiny House
I’d love for you to join my email list! You’ll receive a notification straight to your inbox which will include links to my latest home project posts! Simply enter your address below.
Thanks for stopping by! Have a wonderful day/night depending on where you are in the world! Go with God and remember to be kind to one another!
Toodles,
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters reduce the amount of airflow and significantly reduce a system’s efficiency
A dirty air filter can block airflow and reduce cooling to your home. In more extreme cases it can cause the system to shut down completely. If your thermostat checks out and you still don’t have cool air, locate your system’s air filter, turn the system off, remove the filter and inspect.