Hello World! Welcome Friends! Even though it seems a daunting chore, carpet cleaning isn’t actually difficult as long as you address the problem on time. In reality, the key factor for performing an effective job is finding the most suitable cleaning solution and researching the basic cleaning methods. However, many people aren’t aware of the common mistakes they make when performing a DIY carpet cleaning.
For reliable, affordable, and eco-friendly carpet cleaning services in London, get in touch with Cleaning Day. Their experienced technicians use state-of-the-art equipment and child and pet-safe solutions to deep clean carpets, remove stubborn stains, and restore the original look and feel of your flooring. With same-day and next-day availability, Cleaning Day makes it easy to keep your carpets looking their best all year round.
To avoid ruining your carpet and to extend its lifespan, you need to keep in mind the following common cleaning mistakes.
1. Postponing the Cleaning
Spills sink into the carpet fabric fast, and if you don’t clean them right away, you risk leaving a permanent stain.
If you don’t have the time to deal with a stain when you notice it, take a few minutes to blot the excess liquid and apply some detergent. Otherwise, the carpet fabric will absorb the substance, and it will be impossible to get rid of later.
Some types of stains are particularly bad, and they can seep down to the carpet’s padding. If the liquid is acidic in nature, they can also eat through the carpet’s fabric and leave holes in it.
2. Using the Wrong Carpet Cleaning Solution
There are many different types of carpet cleaners on the market, and the right for your carpet will depend on a variety of factors, such as the materials it’s made of, the type of the stain and its intensity. To help you decide, always read the label on the product and make sure the one you choose is suitable for your type of carpet.
If you can’t find detailed instructions, research the product online. Many domestic cleaners and laundry detergents are often too harsh for carpet cleaning, and they can damage the fibre. In addition, avoid using too much of the solution you’re cleaning with. Over saturation won’t contribute to a cleaner carpet and can, instead, cause damage to your carpet and lead to a buildup of residue that will attract more dirt.
3. Not Testing Cleaning Detergents
Carpet cleaning experts recommend to always test cleaning products on an inconspicuous area of the carpet before you apply them to its entirety. If you’ve been unable to determine whether a product is suitable for your carpet, perform a patch test in a corner or another hidden spot when you’re using it for the first time. By doing this, you’ll be able to avoid doing severe and often
irreparable damage to your carpet.
4. Using Deodorizing Powder for Cleaning
Deodorizing powders are excellent products that bring a refreshing scent to a carpet, but they aren’t formulated for cleaning because they don’t have the necessary properties to remove stains. These products are meant to be used after the stain has been removed and the carpet has dried completely. Deodorizing powders are designed to eliminate any unpleasant leftover odours as a finishing touch.
Besides that, it’s also not recommended to use them too often. Many domestic vacuum cleaners aren’t strong enough to remove all of the powder from carpet fabrics, and the residue can get stuck in the fibers, making your carpet look tacky and dull.
5. Scrubbing Vigorously
The first thing many people do when cleaning a carpet stain is scrub vigorously. However, this can damage the carpet fabrics by untwisting them and making them fray. Besides that, it’ll also spread the stain further and push it further into the fabric, making it even more difficult to clean.
When you notice a stain on your carpet, address it as soon as possible by blotting as much of the liquid as you can. Blotting the stain instead of rubbing or scrubbing will help you avoid getting the carpet too wet, which can prevent it from drying properly, leading to the development and onset of mould and rot.
Additional Tips on Removing Tough Carpet Stains
There are many ways to remove carpet stains, and it’s to your advantage to know these tried and true methods to deal with them.
Pet Stains
To clean a pet stain, first, pick up any residue from the carpet with gloves and dispose of it. If it’s wet, soak the moisture by blotting. Do it repeatedly until the carpet’s almost dry.
If the stain has dried on the carpet, the best way to treat it is to dampen it and apply cleaner specifically formulated for pet stains.
To neutralize the odor, test these methods:
- Use white vinegar. Mix 1/4 cup of vinegar with 1/4 cup of warm water and spritz on the stain. Allow the solution to soak for several minutes and blot until the stain is gone and the spot is dry.
- Use laundry detergent. Mix 1/4 cup of water with laundry detergent and spray it on the spot. Allow the mixture to soak for a few minutes, blot, rinse with warm water, and repeat as many times as necessary.
Coffee Stains
To remove a coffee stain from your carpet, dry the spot by blotting with a towel and be careful not to spread it further. Use a mixture of vinegar, water, and a gentle detergent. Spritz it on the spot, rinse, and repeat. There are also different cleaning products that are sold, formulated specifically for this type of carpet stain.
Blood Stains
When treating a blood stain, always use cold instead of warm or hot water. Blood becomes coagulated with heat, and the cold will prevent it from seeping into the carpet fibres.
- Fill a spritzer with 2 tablespoons of liquid dish soap and cold water.
- Spray on the stain and dampen it liberally.
- Use a paper towel or a dry white cloth and blot the spot.
- Rinse with cold water and repeat if necessary.
Keep in mind that removing blood stains from a carpet usually requires persistence. Ink stains
Inks stains are known for wreaking havoc on carpet fabrics. However, if you act quickly, they can be removed effectively.
- Dampen a clean cloth with isopropyl alcohol (the higher the percentage of the active ingredient, the better it’ll work).
- Dab it on the stain.
- Let it sit for a few minutes, and use a vacuum to remove the excess moisture.
- Repeat the process as many times as necessary.
Final Words
It’s very important to be proactive and knowledgeable when caring for and maintaining your carpet so it stays in pristine condition and lasts you for a long time. While it’s important to do that regularly, keep in mind that deep cleaning it too often can also cause damage by tarnishing the fibre and making the fabric look damaged and faded.
Even though you may want to save money, sometimes the stains and carpet damage can be too severe. In such cases, it’s best to hire a carpet cleaning service. They will have the necessary equipment and expertise to meet your carpet’s cleaning needs and often even repair it to its original condition.
Click the links below for any posts you have missed:
Here’s Why You Should Get a New Mattress
Ingenious Ways to Incorporate Shipping Containers Into Your Home Design
Sewer Rodding: Unlocking the Path to Smooth Drainage and Peace of Mind
Experience Superior Craftsmanship: Stucco Services Tailored to Perfection
From Classic to Contemporary: Shingle Roofing Styles to Suit Every Home
How to Make Your Bathroom Appear Magazine-Worthy
I’d love for you to join my email list! You’ll receive a notification straight to your inbox which will include links to my latest home project posts! Simply enter your address below.
Thanks for stopping by! Have a wonderful day/night depending on where you are in the world! Go with God and remember to be kind to one another!
Toodles,
[…] 5 Carpet Cleaning Mistakes to Avoid […]